Stalker Traffic Statistics Sensor
Stalker’s Traffic Statistics Sensor delivers high performance with low power requirements for pole mount or speed/message trailer application.
The Stalker Traffic Statistics Sensor is a self-contained system to monitor and internally record traffic patterns on roadways in virtually any location and weather condition.
In addition to its statistical capabilities, the unit can track up to 10 moving vehicles simultaneously and operate as an ordinary speed sensor feeding strongest and fastest target information to external systems through a RS-232, RS-485, USB Communication, or USB flash drive interface.
Designed for use with the Stalker Traffic Analyst Application.
RS-485 connection allows for multiple sensors to one controller.
Internal Real Time Clock for date time stamps.
|200-0880-01||Side Port RS-232 and RS-485|
|200-0880-53||Rear Port RS-232, RS-485,
and USB com port
Rear Port RS-232, RS-485 and
This sensor is identical to the 200-0880-53 with the exception that this product is intended for embedded use only, where it will be installed inside a protective housing by the end user.
|200-0880-54||Side Port USB com port only|
|200-0880-56||Rear Port RS-232, RS-485 and USB
memory stick port
|200-0880-57||Rear Port RS-232, RS-485, USB com port, and USB memory stick port|
Designed for use with the Stalker Traffic Analyst
Using captured data from the Stalker Traffic Statistics Sensor, updated analysis control allows you to take raw data and display it by count vs time, count vs speed, and 85th percentile, just to name a few. Data can be split, graphed, filtered, and then rendered in a color report designed with Agency branding and support information.
Beginning with the setup, the actual sensor can be configured. Then, the intuitive survey management tools walk the user through calendar setup, location details, speed and time resolutions, vehicle classification, speeds, distances, and more. .
Features of the Stalker Traffic Statistics Sensor
PC Graphical Interface included
Combined Data/Power Statistics Developer Kit
Part number: 200-1026-20
- Interface Box (155-2360-01)
- Switching Power Supply with US/Euro plug sets (200-1021-00)
- Application CD with Config files (200-0972-00)
- USB-to-Serial (DB9) Port Adapter (015-0196-00)
- Serial cable (10’) (155-2130-00)
- Sensor Mount and Pole Clamp
- Statistics Application CD (200-0973-00)
|Max Range||>1300 Feet (400 m)|
|Min Speed||1 MPH (1.6 km/h)|
|Max Speed||200 MPH (321.9 km/h)|
|Speed Resolution||0.1 MPH (0.16 km/h)|
+/- 0.5 mph +/-0.3% (+/- 0.8 km/h +/-0.3% )
|Directionality||Approaching, Receding, Both|
|4 Communications types||RS-485 full duplex
RS-485 half duplex
RS-232, no flow control
|Multiple ports available simultaneously depending on model ordered|
|Baud Rates||9.6K to 921.6K baud|
|11 streaming protocols|
|3 polled protocols|
|Any output protocol on any port|
|Sensor are addressable with multi-drop capabilities
Trigger Output (not available on 200-0880-54, and -57):
Electrically isolated trigger contacts
|Two normally open (NO) contacts|
|60 volt max|
|400 mA max|
10 to 45 volts, DC
|Current||80 mA @ 12 VDC typ.
|Power||< 1 watt
Reverse voltage protection
|Center frequency||24.125 GHz
|Frequency Span||100 MHz
|Transmit Power||100 mW|
|Beam Width||30° by 32°|
|F.C.C. Approved. No license required.
|Size (LxWxD) w/o connector||4.4 x 3.9 x 1.6 inches (11.2 x 9.9 x 4 cm)
|Weight||<13 oz. (.35 kg)
|Electrical connector||M12, 12 pin|
|Mounting||4 x 10-32 UNF|
|Operating temp.||-22° F (-30° C) to +158° F (+70° C)
|Storage temp.||-49° F (-45° C) to +185° F (+85° C)
Sensor Wizard Application
REACT Application Downloads
USB Driver Downloads