Stalker Low Speed Sensor
The ideal sensor for mining, agriculture, and harbor applications where accurate, low speed is essential.For applications where accurate, low speed, is essential. The Stalker Low Speed Sensor measures speeds from 0.1 mph to 70 mph with low power consumption and competitive price.
FEATURES |
mph, km/h, knots, m/s, ft/s |
RS-232, RS-485, USB |
11 streaming, 3 polled protocols |
IP67 rated |
Low power consumption <1 watt |
1-Year parts and labor warranty |
Performance | |
Range | >1300 feet (400 m) |
Minimum Speed | 0.1 mph (0.1 km/h) |
Maximum speed | 70 mph (112 km/h) |
Speed Resolution | 0.01 mph (.016 km/h) |
Speed Accuracy | ±0.15 mph ±3% ±0.24 km/h ±3% |
Directionality selections - Approaching, Receding, Both |
Part Number | Description | |
---|---|---|
200-0880-60 | Rear Port RS-232, and RS-485 | ![]() |
Features of the Stalker Low Speed Sensor
Stalker Sensor Wizard Application included
Developer Kit
Combined Data/Power Developer Kit
Part number: 200-1026-01
- Interface Box (155-2360-01)
- Switching Power Supply with US/Euro plug sets (200-1021-00)
- Application and Config files (200-0972-00)
- USB-to-Serial (DB9) Port Adapter (015-0196-00)
- Serial cable (10’) (155-2130-00)
- Sensor Mount and Pole Clamp
Performance:
Max Range | >1300 Feet (400 m) |
Min Speed | 1 MPH (1.6 km/h) |
Max Speed | 200 MPH (321.9 km/h) |
Speed Resolution | 0.1 MPH (.16 km/h) |
Speed Accuracy | +/- 0.5 mph +/-3% (+/- 0.8 km/h +/-3% ) |
Directionality | Approaching, receding, both |
Communications Ports:
4 Communications types | RS-485 full duplex RS-485 half duplex RS-232, no flow control USB |
Up to four simultaneous ports | One RS-485 FD, one RS-232, and one USB port Two RS-485 HD, one RS-232, and one USB port |
Baud Rates | 9.6K to 921.6K baud |
11 streaming protocols | |
3 polled protocols | |
Sensor are addressable with multi-drop capabilities |
Trigger Output
Electrically isolated trigger contacts |
One normally floating contact - pulled to ground for alarm state |
60 volt max |
400 mA max |
Power:
Voltage | 10 to 45 volts, DC |
Current | 80 mA @ 12 VDC typ. |
Power | < 1 watt |
Protections | Transient protection Reverse voltage protection Resettable Fuse |
Microwave:
Center frequency | 24.125 GHz |
Frequency Span | 100 MHz |
Transmit Power | 100 mW |
Beam Width | 30° by 32° |
F.C.C. Approved. No license required. |
Physical Specifications:
Size (LxWxD) w/o connector | 4.4 x 3.9 x 1.6 inches (11.2 x 9.9 x 4 cm) |
Weight | <13 oz. (.35 kg) |
Housing | Die-cast aluminum |
Lens | HDPE |
Electrical connector | M12, 12 pin |
Mounting | 4 x 10-32 UNF |
Environmental:
Operating temp. | -22° F (-30° C) to +158° F (+70° C) |
Storage temp. | -40° F (-40° C) to +185° F (+85° C) |
Ingress rating | IP67 (excluding 200-1004-00 open board speed sensor) |
Brochure Downloads
Manual Downloads
Sensor Wizard Application
REACT Application Downloads