PMG Flood Sensor
Adding the PMG Flood Sensor to the Pole Mounted Graphic Display (PMG) Sign automatically detects high water, alerts motorists, and saves lives
PMG Flood Sensor
Turn your Stalker PMG into a life-saving device. The PMG Flood Sensor, installed in conjunction with a PMG in flood prone areas, allows the PMG to present appropriate messages for travelers in the affected area.
The unique PMG Flood Sensor device consists of a tamper-proof metal enclosure which houses the fluid sensor. It is designed to be able to be submerged in water with no damage.
The sensor is wired directly to the PMG receiving power and sends the high-water signal over the same cable. Up to 3 sensors can be attached to a single PMG, allowing for progressive levels of alert escalation and de-escalation based on current water level.
The PMG can be programmed to display a message when the sensor detects high water. The alert message is selectable from pre-set options or can be customized. The choice of message is based on the recommended action for the location. With multiple sensors, the PMG can display different messages for each scenario.
LINK UP TO 3 FLOOD SENSORS
Up to 3 flood sensors can be connected to a single PMG.
SENSOR CAN BE WIRED UP TO 1025 FT.
Each flood sensor has its own cable of up to 1025 feet, which provides power and return signal.
PART OF PMG GPIO SYSTEM
With its built-in GPIO port, a PMG can support a single flood sensor without the need to add more hardware.
SIMPLE CONFIGURATION SOFTWARE
The easy to use software allows the user to edit the alert message.
HOW IT WORKS
The PMG flood sensor is placed in the target area so that the detector level is at the desired height of the high-water trigger point.
When water rises above the detector, a signal is sent to the PMG
The 3-Port Expander allows for connecting multiple Flood sensors to a single PMG without the need for GPIO port specific cables.
Setup multiple sensors as a cascading set of messages, i.e. Road Closed – High Water – Flood Area.