
2021-2023 Chevy Tahoe Front Combo Mount
Replaces front dash insert with combination Ka-Band antenna and counting unit/display mount. Includes complete installation instructions and hardware.

2021-2023 Chevy Tahoe Rear Ka-Band Antenna Mount
For Ka-Band antenna. Mounts to rear ceiling, complete installation instructions and hardware are included.

2015-2020 Chevy Tahoe Display Mount
Display/Counting unit mount. Mates with 200-1088-00 (Ka-Band) or 200-1088-01 (Patrol) front antenna mount. Detailed installation instructions included.

2015-2020 Chevy Tahoe Front Antenna Mount
Ka-Band front antenna mount. Mates with 200-1089-00 counting unit/display mount. Detailed installation instructions included.

2015-2020 Chevy Tahoe Rear Antenna Mount
Ka-Band antenna. Mounts to rear ceiling, complete installation instructions and hardware included.

2009 – 2014 Chevy Tahoe Dash Mount
Combined Ka-Band antenna and 2X, DSR, or DUAL display/counting unit; or antenna and 2X, DSR, or DUAL display only.

2015-2017 Chevy Tahoe-Yukon Rear Lift Gate Antenna Mount
Through the use of a supplied rivet nut, safely and securely mount a Ka-Band antenna to the rear lift gate ceiling panel. Extra rivet nuts and machine screw supplied. Instruction sheet included (011-0134-00)

2021 Dodge Charger Rear Antenna Mount
Securely mount the rear Ka-Band antenna to the rear child safety loop. Complete installation instructions and hardware included.

2015 – 2023 Dodge Charger Front Radar Clamp Mount
For Ka-Band Radar: Stalker 2X, DSR, and DUAL SL. Front radar and antenna clamp mount for Dodge Charger. Attaches securely without drilling any holes.

2015 – 2023 Dodge Charger Front Pillar Radar Mount
For Ka-Band Radar: Stalker 2X, DSR, and DUAL SL. Front pillar radar and antenna mount for Dodge Charger. Attaches securely to spotlight post and dash without drilling any holes.

2014-2020. Dodge Charger Rear Antenna Mount
Secures Ka-Band rear antenna utilizing rear child safety restraint loop.

2021-2023 Dodge Durango Combination Dash Mount
Complete kit for mounting the counting unit/display and either a K-Band or Ka-Band antenna. Comes complete with hardware and mounting instructions.

2019-2020 Dodge Durango Combination Dash Mount
Complete kit for mounting the counting unit/display and either a K-band or Ka-Band antenna. Comes complete with hardware and mounting instructions.

2019-Present Dodge Durango Rear Antenna Mount
Complete kit for mounting the rear antenna. Comes complete with hardware and instructions. (Antenna not included)

2020-2023 Ford Interceptor SUV Combination Dash Mount
Complete kit for mounting the counting unit/display and antenna. Comes complete with hardware and instructions.

2020-2023 Ford Interceptor SUV Rear Antenna Mount
Complete kit for mounting rear antenna. Comes complete with hardware and instructions.

2015-2019 Ford Interceptor Sedan Display Mount
Front center mount for display (separated from the counting unit). Includes Installation instructions. Requires 155-2211-00 remote display cable.

2015-2019 Ford Interceptor Sedan Front Antenna Mount
Ka-Band front antenna mount kit. Mounts into front dash defroster vent. Complete hardware and installation instructions included.

2015-2019 Ford Interceptor Sedan/SUV Dash Mount
Front center mount for counting unit/display or display alone. Installs on both Sedan and SUV. Includes simple installation instructions. Replaces 200-1063-00 (SUV) and 200-1086-00 (Sedan)

2015-2019 Ford Interceptor SUV Front Antenna Mount
Ka-Band antenna mount for front antenna. Includes 006-0575-00 Installation instruction sheet.

2015-2019 Ford Interceptor SUV Display Mount
Front center mount for display (separated from the counting unit). Includes 006-0576-00 Installation instructions. Requires 155-2211-00 remote display cable (10 foot)

2015-2019 Ford Interceptor SUV Rear Antenna Mount
Rear ceiling mount. Includes 006-0574-00 Installation instructions.

2013-2014 Ford Interceptor Sedan Dash Mount
Combined Ka-Band antenna and 2X, DSR, Dual display/counting unit; or antenna and 2X, DSR, Dual display only.

2020-Present Ford F-150 Rear Antenna Mount
Complete kit for mounting the rear antenna. Comes complete with hardware and instructions. (Antenna not included)

2019 – 2020. Ford F-150 Combination Dash Mount
Complete kit for mounting the counting unit/display and antenna. Comes complete with hardware and mounting instructions.

2021-2023 Ford F-150 Front Combo Mount
Replaces front dash insert with combination Ka-Band antenna and counting unit/display mount. Includes complete installation instructions and hardware.

Counting Unit Glass Mount
Suction Cup Mount for 2X, DSR, or Dual combined counting units, and display or display only to windshield. Also mounts new Stalker PATROL counting unit.

Combo Suction Cup Mount
Powerful suction cup mount for combined Ka-Band antenna and 2X, DSR, or DUAL display/counting unit; or antenna and 2X, DSR, or DUAL display only. (Not recommended for Caprice or Dodge Charger)

Antenna Mount with Shield
Suction cup antenna mount with Fan Noise Shield Plate. Mounts Ka-Band antenna only to the dash board. Includes Velcro & thumbscrews.

Combination Dash Mount
Mounts a Ka-Band antenna and a counting unit to the dash board with Velcro. Includes Velcro & 3 thumbscrews.

Counting Unit Mount – Tall
Mounts a counting unit to the dashboard. Includes velcro and (2) thumbscrews, and two mounting location holes.

Ka-Band Antenna Mount
Mounts Ka-Band antenna only to the dash or deck. Dimensions: 2.8" wide x 2.25" deep x 2" tall. Includes Velcro and thumbscrews.

Tall Antenna Mount
For Ka-Band antenna when extra height is needed for dash- or deck-mount. Dimensions: 2.8" wide x 2.25" deep x 3.6" tall. Includes velcro and thumb screws.

8″ Headliner Antenna Mount
Mounts either K- or Ka-Band antenna to the vehicle’s headliner. Adjusts to various angles.

4″ Headliner Antenna Mount
Mounts either K- or Ka-Band antenna to the vehicle’s headliner. Adjusts to various angles.

6″ Headliner Antenna Mount
Mounts either K- or Ka-Band antenna to the vehicle’s headliner. Adjusts to various angles.

Suction Cup Antenna Mount
Mounts Ka-Band antenna only to the dash board. Includes Velcro & thumbscrews.

Counting Unit Mount – short
Mounts a counting unit to the dashboard. Includes velcro and (2) thumbscrews.

Combo Spotlight Mount
Mounts antenna and a counting unit to the spotlight clamp. Includes Velcro & 3 thumbscrews. Can be used for Dodge Charger with spotlight. NOTE: Will not mount to Ford Interceptor Sedan or SUV, or Impala with short inside shaft.

Antenna Mount for Glass
Mounts either a K-Band or Ka-Band antenna to the windshield.

Side Window Mount
Mounts up to 1 or 2 Ka-Band antennas to a side window. Uses cork and foam rubber padding around the glass.

Antenna Swivel Mount
Mounts Ka-Band antenna only to the dash or deck. Swivels horizontally. Includes Velcro & thumbscrews.

Dual Pivot Arm Antenna Mount
Mount a Ka-Band or K-Band antenna easily and securely to the vehicle A-pillar. Pivot points rotate 180 degrees for optimum antenna orientation.

Display Sun Shield
Metal hood is slide adjustable forward and backward and fits all standard counting units/displays. Includes (2) 1/2" thumbscrews.

2 ft. Antenna Cable
Plugs into the back of the Stalker 2X, DSR, and DUAL counting units and runs to the radar antenna. IP67

4 ft. Antenna Cable
Plugs into the back of the Stalker 2X, DSR, and DUAL counting units and runs to the radar antenna. IP67

8 ft. Antenna Cable
Plugs into the back of the Stalker 2X, DSR, and DUAL counting units and runs to the radar antenna. IP67

16 ft. Antenna Cable
Plugs into the back of the Stalker 2X, DSR, and DUAL counting units and runs to the radar antenna. IP67

20 ft. Antenna Cable
Plugs into the back of the Stalker 2X, DSR, and DUAL counting units and runs to the radar antenna. IP67

25 ft. Antenna Cable
Plugs into the back of the Stalker 2X, DSR, and DUAL counting units and runs to the radar antenna. IP67

Remote Display Cable-10 ft
10 ft. right-angle cable assembly - Plug at the display end is a right angle - connects a standard display to a counting unit.

Remote Display Cable-25 ft
25 ft. right-angle cable assembly - Plug at the display end is a right angle - connects a standard display to a counting unit.

Power Cable
Powers the Stalker Dual, DSR, 2X and PATROL counting units. Connects to the counting units serial connector and runs to a 12 volt DC lighter outlet. This is the Standard Power Cable.

Y Cable with Serial
Powers the Stalker Dual, DSR, 2X and PATROL counting units from a 12 volt DC accessory outlet and splits to provide a serial connector.

Serial to PC Interface Cable
15 ft. Data cable that attaches to power, or VSS with serial port cable for data communication.

Extension Cable for Metal Remote – 5 foot
5 foot extension cable for the metal, wired, remote controls. Remote control part number: 200-1322-00, 200-1322-01, 200-1320-00, and 200-1320-01.

Extension Cable for Metal Remote – 20 foot
20 foot extension cable for the metal, wired, remote controls. Remote control part number: 200-1322-00, 200-1322-01, 200-1320-00, and 200-1320-01.

Extension cable
A 9-Pin, D Connector male to female, 10 foot pin-to-pin extension cable.

Straight Thru Radar to PC Interface Cable
15 foot, radar to in-car video system, RS-232 data communication cable when 155-2195-00 cable is not needed.

2X Instant-On Remote
Ergonomic "Instant-On" Infrared remote for Stalker 2X, includes (2) AAA batteries and Velcro.

2X Fast Lock Remote
Ergonomic "Fast Lock" Infrared remote for Stalker 2X, includes (2) AAA batteries and Velcro.

Wired, Metal Remote Control for 2X – Bottom Exit
Wired, metal remote control for Stalker 2X - bottom cable exit. Requires either 20 foot extension cable (155-2547-20), or 5 foot extension cable (155-2547-05)

Wired, Metal Remote Control for 2X – Top Exit
Wired, metal remote control for Stalker 2X - top cable exit. Requires either 20 foot extension cable (155-2547-20), or 5 foot extension cable (155-2547-05)

Battery Compartment Door
For new style Ergonomic Remotes: 200-0830-00, 200-0837-00, 200-0831-00, 200-0838-00, 200-0867-00, 200-0878-00, 200-0918-00, 200-0919-00, 200-0920-00, 200-0921-00.

Remote Control Coiled Cable
A coiled phone-type cord to power the remote control. Connects from the back of the counting unit to the bottom of the remote (removing the battery is necessary.

Battery compartment door
Fits older remotes: 200-0579-00, 200-0579-01, 200-0553-01, 200-0582-00, 200-0807-00

Ka-Band 25 MPH Tuning Fork
Tuning forks for Ka-Band radar. Each tuning fork comes with a certificate of accuracy.

Ka-Band 40 MPH Tuning Fork
Tuning forks for Ka-Band radar. Each tuning fork comes with a certificate of accuracy.

Ka-Band 55 MPH Tuning Fork
Tuning forks for Ka-Band radar. Each tuning fork comes with a certificate of accuracy.

Dash Mount Hard Case
Heavy duty, water resistant hard plastic case with die cut foam for Stalker 2X, DSR, or DUAL.

Star Knobs and Washers – Antenna Mount
Kit of star knobs (2) and washers to attach an Ka-Band or K-Band antenna to a mount

Star Knobs and Washers – Counting Unit
Kit of star knobs (2) and washers to mount a Stalker radar counting unit and/or sun shield